DIY Christmas Garland - 20 Ideas

Garlands are beautiful, original and festive, it is not surprising that they are a traditional decoration for the New Year. They can be simple and complex, monophonic or multi-colored, made of paper, cones, spruce twigs, sweets and other improvised materials. The article describes more than 20 options on the topic: Christmas garland with their own hands, each detailed instruction is attached.

Paper garlands

From paper trees

Even a child can cope with making such a simple decoration. For work you will need:

• Christmas tree pattern (you can draw by hand or find on the Internet and print);
• thick paper or cardboard with a bright pattern (it is desirable that the patterns are diverse, then the garland will be colorful and festive);
• scissors;
• hole puncher;
• rope.

On the back of the colored cardboard, circle the prepared template and cut the required number of Christmas trees along the contour. Make a hole in the top of each part with a hole punch. Put all the Christmas trees on the rope. Thread the rope twice through each hole. Then the flat parts will be more stable, will not move down the cord and deviate to the side.

Carved herringbone

This option is somewhat similar to the previous one in terms of design and execution, except that the Christmas trees are radically different due to the original design. It will take:

• colored or patterned paper;
• rope;
• scissors;
• ruler;
• pencil.

Draw the isosceles triangles on the back side of the sheet. They may be the same size or different. No need to make too high or narrow parts. If the width of the base is 10 cm, then the sides should be no more than 12-13 cm. Next, you need to perform serif lines on the tree for several levels. The intervals between them should be the same. The first notch (the place of the future notch) is a line parallel to the base, which does not reach the sides by about 0.5 cm. Stepping up from it, draw two notches opposite each other parallel to the previous one, from the left and right edges. Naturally they should not converge in the middle. The next notch repeats the first one and so on. Cut the details along the lines drawn. At the top, make a hole punch hole through which the Christmas trees will be put on the cord.

"Snowflake"

Ways to make garlands with snowflakes very much. The following describes only one of the possible. For work you will need:

• thick cardboard of different colors;
• scissors, punch;
• fishing line or rope.

From the back of the cardboard, draw snowflakes on the selected template. The optimal size of the element - 10-12 cm in diameter. Make holes with scissors or a puncher: one on opposite rays and two in the middle. Slip the snowflakes on a thread or thin rope through the holes, alternating colors. The red-and-white festoon looks very interesting. If you want to make patterned snowflakes, cut them out of thin paper or napkins. Then put it on a flat surface and grease with glue water (2 tablespoons of PVA per glass of water). After drying, the parts will keep their shape as starched.

Christmas trees from paper molds for cupcakes

The garland is a rope on which small three-tiered Christmas trees made of colored molds are attached. Making them is very simple. It will take:

• Molds for muffins (in an amount of a multiple of 3);
• Glue or stapler;
• Colored cardboard;
• Hemp rope.

One mold fold four times, it will be one tier. Three, folded triangle, glue the molds together, forming a Christmas tree. You can use clips or glue guns. Decorate the top of Christmas trees with small colored cardboard stars. Using the same clips or glue gun, attach the Christmas trees to the string.

Tip! Try to combine several elements on one garland, for example, Christmas trees and snowflakes made in different ways.

Paper spiral

This decoration is made very easy, but it looks unusual and interesting. Spiral garland can be placed on the chandelier, window or ceiling, in any place where it will hang freely. For work you will need:

• thick cardboard;
• scissors;
• small Christmas balls;
• ribbons;
• glue.

Cut a large circle out of cardboard, draw a snail inside it and cut it out with a scissors along the contour. Ribbons will be needed in order to attach the balls to the cardboard snail at equal distances with an adhesive or stapler. Glue one ribbon on top, making a loop for which the garland will be hung.

Bulk garland of colored paper

Not so long ago, such garlands were very popular and were found in almost every apartment. Today they are replaced by a more interesting decor. Nevertheless, this option deserves attention. For the manufacture of jewelry will need:

• colored paper
• scissors
• stapler

Sheets of paper make a square shape. Fold the sheet in half to form an isosceles triangle and then fold it in half again, you get a multi-sided triangle. Make cuts along the fold line, without cutting to the edge 0.5 cm. Make the same cuts on the opposite side and turn the paper square again. For the garland there must be a pair of parts. Connect two squares of the same color, gluing the corners together. Several pairs of bonded squares, glue together with each other through the middle. When all the parts are connected, stretch them. It turns out volumetric, nice decoration.

Color chain

Very simple decoration, which many know since high school. For the manufacture will need:

• color paper;
• scissors;
• PVA glue.

Paper cut into thin equal strips of a width of 0.5-1 cm, a length of 6-10 cm. From these strips glue the rings together, connecting them together. Be sure to alternate colors. You can decorate the chain with paper flags or flashlights.

The easiest to make paper garland

This option is completely uncomplicated, but at the same time very nice. It is a curved paper strip. Most often, these garlands are fixed on the ceiling or on the wall, they hang down like a serpentine. For work you will need:

• color paper;
• stapler;
• scissors.

Cut strips of colored paper with a width of 10-15 cm. On each side, make cuts in increments of about 2 cm, without cutting up to the end of 1-2 cm. Turn the strip between the ready cuts, make the same from the other side, also reaching the edge. It turns out the preparation of a garland in the form of a ribbon, cut with scissors from two sides. Stretch the resulting strip. If you need a tape of greater length, connect several elements. The decoration looks beautiful when prepared with several long ribbons of different colors.

​

Bulk garland with corrugated paper fringe

This decoration is more like a fluffy colored rain. For creativity you will need:

• a roll of corrugated paper;
• scissors;
• sewing machine.

Cut the whole roll into several small rolls 5-10 cm wide, depending on the desired width of the finished product. Roll them out, get long ribbons. Fold several tapes together and sew in the middle on a sewing machine. At the edges, make a lot of small notches using ordinary or curly scissors. The main thing in this work is not to hurt the middle. Then straighten the fringe, trying not to stretch it too much. Get a fluffy airy decoration. In the manufacture of garlands, you can connect tapes of different colors, then it will turn out brighter.

Garland on the finished pattern

Garlands in the form of a round dance, which is introduced by Santa Claus, Snow Maiden, Snowman, Christmas Tree and other New Year characters, look very interesting. Heroes can be performed independently in the form of applications. The main thing is that their pens be set aside to be able to fasten parts. If reluctance to bother with the production, find on the Internet ready-made images, print on a color printer and cut. It is better to connect the parts with a thin wire or special rivets so that they remain mobile.

Garlands from natural materials

Of cones, dried oranges and pieces of felt

It is very simple to make such a garland, you just have to pick up the cones in advance and prepare the orange slices. Citrus cut into thin slices and dried in the open air or in the oven. Garlands of this type are usually collected on hemp rope. For work you will need:

• dried oranges;
• fir cones;
• rope;
• felt;
• hot glue;
• any other natural decor (cinnamon sticks, bay leaf, mistletoe, coniferous twigs, acorns, etc.).

Such a garland can be done in two ways. First: cut a long rope, the length, which should be decorated and tie many knots on it. On each paste a decorative element. The second option looks more interesting and volumetric. For each decorative element, additionally cut short ropes of different lengths and use them to attach the parts to the main cord.

Felt is needed to cut the figures. They can be flat or volumetric. In the second case, you will have to cut two identical parts and sew them together, filling the inside with cotton wool or other soft material.

This garland is wonderfully complemented by asterisks from the vine, painted in golden color or spruce twigs. The finished product can sometimes be covered with gold or silver paint, artificial snow.

From coniferous branches and cones

Wonderful "live" garland can decorate anything you like inside and outside the house. It looks really gorgeous and festive, and make it completely easy. It will take:

• fir branches;
• cones;
• wire;
• Christmas-tree decorations (bows made of wide ribbons or burlap, beads, orange peel shapes and other decorations will also do);
• corrugated plumbing pipe (used as the basis for such a rather heavy garland, it is flexible and durable).

Spruce branches cut and fasten to the tube with wire, as if twisting a wreath. In the course of the set add cones and other decor. Already ready garland decorate with artificial snow.

Garlands of sweets

From candies: 3 options

Many people decorate the Christmas tree with sweets, but you can also make it beautifully from the sweets. Before work, it is desirable to eat well, so as not to eat half the details.

Bonding candy can be one of three ways:

• Tails of sweets fasten with each other using a stapler or thin short wires. To make the decoration look harmonious, it is better to use candies of the same size but different colors.
• The second method is the separate binding of candy with the help of a rope cut into small pieces. Connect the candies by tying in turn so that between the tails of the candy wrapper is a piece of rope.
• The third method is the most time-consuming, but it also looks much more interesting. For the garland, prepare one long piece of rope of the length that the finished decoration should be. The rope must be thick enough to support the weight of all the candies. With the help of thinner ropes or ribbons of different lengths, each candy is individually tied to the main cord. In this case, the more varied the candy, the better.

With edible bulbs

Without a doubt, this original decoration is made very easily. For work you will need:

• sweets m & m's or similar (you can take raisins in chocolate, but then the garland will not be so bright);
• jelly sweets (it is most convenient to use jelly worms);
• knife;
• fishing line or thread with a needle;
• lighter.

Candy m & m's in this case will play the role of the bulb itself, and marmalades, cut into small pieces, will be a socle. Prepare the details. For each dragee, cut off small jelly cylinders. On the one hand, with the help of a lighter, melt the glue a little and attach it to the “light bulb” with a hot edge. When the required number of parts will be ready, string them on a string through the jelly base. The string should not be too thick, otherwise the jelly will break.

Popcorn and breakfast cereal

Edible garland will look great on the green branches of spruce. For the manufacture will need:

• thread or fishing line with a needle;
• popcorn;
• dry breakfast in the form of multicolored circles.

String popcorn on a string, alternating it with dry breakfast ringlets. It is not necessary to comply with any sequence, the elements can be strung in a chaotic manner.

Garlands of other materials

"Snowball"

A very interesting version of the vertical garland, which looks like a real snowfall. This decoration can decorate a window or a chandelier above the holiday table. To make a snowfall you will need:

• white thread with a needle;
• round foam or cotton wool.

On a long thread nanizhite foam crumbs. The more such threads there are, the more spectacular the snowfall will look. Well if the balls will be of different sizes. Replace the foam can be conventional cotton wool. Tear the cotton into small pieces and roll the balls. So that the snow does not fall off on a string, glue it with ordinary PVA.

From pasta

Recently, Christmas tree toys made from curly pasta have become very popular. They are easy to make their own hands, and painted in gold or silver, they look like an expensive decor. There are plenty of examples of making snowflakes on the Internet, and if you make several and attach them to pasta beads, you will get a wonderful garland. The thread on which the jewelry will be attached must be strong enough.

Make a small loop and string pasta on the rope until the "beads" become the necessary length. Complete the garland with beads, ribbons, bows and of course macaroni snowflakes.

From pompons

Soft warm garlands of pompons can decorate anything, starting with a Christmas tree and ending with a window. For work, you will need a few skeins of colored yarn or a pair of annoying sweaters.

Pompons do in any convenient way. The easiest and fastest option is on the fingers. Wind the threads on two or three fingers, then, without removing from the fingers, tie the loop in the middle, dividing it into two equal parts. Leave the dressing thread long. Later with the help of it will connect the individual elements. Cut the loops along the edges. The more threads will be wound, the more fluffy the pompon will be. Pompons can be of different sizes and colors. The basis may be a harness or braid of the same thread from which the pompons were made.

Of brushes

Garlands with tassels traditionally decorate birthdays and weddings, but there is no doubt that it can be a wonderful decor for a New Year's interior. Tassels can be made of corrugated paper, specialty paper or ordinary napkins. It will take:

• napkins;
• scissors;
• cord or ribbon for warp.

For the manufacture of brushes need to prepare rectangular parts. Spread the napkin in one layer and cut it in half. Fold the resulting rectangle in half. On the side of the opposite fold, make small notches. Spread the napkin again. The result should be a rectangle with a fringe on both sides. The middle remained whole. Starting from the long edge, twist the workpiece with a straw, and then twist the middle with a cord and fold it in half. The result should be a loop with a fluffy tail. Finished tassels nanizhite on the prepared tape. That they did not crawl, fasten each bundle during stringing.

Out of felt

Those who are engaged in handmade, for sure, there are remnants of felt, from which you can sew a beautiful bright garland. It will give individuality of the situation. It is also very simple. For work you will need:

• multi-colored felt (can be replaced with any other rather dense fabric);
• scissors;
• patterns (it can be anything of a round shape: caps, caps, bottles, cups, glasses);
• sewing machine or thread with a needle.

A blank for the garland is a lot of felt-cut circles. It is advisable to make them different in color and size. Those who wish can add a garland of stars, hearts, diamonds and other forms of the same material.

Now, in turn, stitch all the cups in the center with the help of a sewing machine. All parts must connect a single seam. It is easier and faster to do this on a typewriter, but the manual version will do. The length of the garland is regulated as desired. At the ends, it is desirable to leave a thread or sew a loop so that the decoration can be fastened.

Anyone who has a desire and a little free time will be able to make a beautiful garland for the new year. Pay attention to make such things do not need to be an artist, designer or professional decorator. Many of the presented "recipes" are perfect for classes with children. And finally: not necessarily strictly follow the rules, connect the imagination and do not be afraid to experiment.